Partner P 352-16 35cc Russia Manual do Utilizador Página 1

34IDENTIFICATION (WHAT IS WHAT?)ChainAdjustment Tool(Bar Tool)Primer BulbFuel Mix Fill CapStarterHousingBar Oil Fill CapChainFront Hand GuardFront Han

43S Roll the log over and finish with a secondovercut.S Give special attention to logs under strainto prevent the saw from pinching. Makethe first cut

44SERVICE AND ADJUSTMENTSWARNING: Disconnect the sparkplug before performing maintenance, exceptfor carburetor adjustments.We recommend all service an

45CHAIN SHARPENINGChain sharpening is a complicated task thatrequires special tools. We recommend thatyou refer chain sharpening to a professionalchai

46TECHNICAL DATA SHEETEngineCylinder volume, cm335Stroke, mm 32Idle speed, rpm 3,000Recommended max.speed, unloaded, rpm 13,000Power, kW 1,3Ignition s

47The Electrolux Group is the world’s largest producer of powered appliances for kitchen,cleaning and outdoor use. More than 55 million Electrolux Gro

35SAFETY RULESWARNING: Always disconnectspark plug wire and place wire where it can-not contact spark plug to prevent accidentalstarting when setting

36S Mix and pour fuel in an outdoor area on bareground; store fuel in a cool, dry, well venti-lated place; and use an approved, markedcontainer for al

37Thumb on underside ofhandlebarElbow lockedS Keep a good, firm grip on the saw with bothhands when the engine is running anddon’t let go. A firm grip

38SAFETY NOTICE: Exposure tovibrations through prolonged use of gasolinepowered hand tools could cause bloodvessel or nerve damage in the fingers,hand

397. Place chain over and behind clutch, fittingthe dri ve links in the clutch drum sprocket.8. Fit bottom of drive links between theteeth in the spro

40IMPORTANTExperience indicates that alcohol blended fuels(called gasohol or using ethanol or methanol)can attract moisture which leads to separationa

41S The inertia activated chain brake is acti-vated if the front hand guard is pushed for-ward, either manually or by centrifugalforce.S If the brake

42NOTCH CUT AND FELLING THETREES Make notch cut by cutting the top of thenotch first. Cut through1/3 of the diameterof the tree. Next complete the not